Auto-aligning T-Slots ( Alu inserts) M3, M4 and M5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recreation of the Prusa XL auto aligning T-slots (Aluminium profile inserts) for M3, M4 and M5 hex nuts.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 145
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Recreation of the t-Slot auto aligning incert sof the Prusa XL for different hex nut sizes (M3, M4, M5).
so Far I tested only the M5 and M3 it worked great. ( Do not worry if the winds break or bend while inserting, as soon as they do not fall completely of it will work as intended)
I would recomend to print it in PETG to give a bit more elasticity to the wing.
| Recommended Slicing settings | |
| Material | PETG (or PLA) |
| Nozzle size | Max. 0,4 mm |
| Layer height | Max. 0,2 mm |
| Supports | ON - Paint Manually ( not needed for the wings) |
Installation:
Add the Hex nut on the back of the T-slot.
Insert the T-slot in the slot like the following picture ( taken from Prusa asssembly guide):
Please let me know if there is any issue with the design or something does not fit. I will try to fix it :)