5x5 spacer for Gridfinity to correct the OOPS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you created SCAD parametrized Gridfinity boxes and run into the problem that they are too small for a box...
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 281
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
I used an SCAD parametrized model to create my Gridfinity boxes, using the default parameters.
It turned out that a height of 42mm without Z alignment (trhough e.g. Zack's method) does not lead to the correct height and as such I run into the problem that in my closed Gridfinity box washers and other things started to mix.
In order to prevent re-printing 25 boxes, I created this spacer which allows to be put into the Gridfinity box to compensate for the missing height.
Not sure how useful this is for others - but if you were running into the same problem: Here is the solution.