RaspiCam for PrusaConnect
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.12 – €0.15 net (excluding VAT)
For file: RaspiCam_Case_Camera_Support_0.4n_0.2mm_PETG_MK4IS_8m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.14 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 7.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Camera Case and Arm for a Raspberry Pi Zero 2 w and a Zero Cam to add a Camera to PrusaConnect
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
EN:
I made an Raspberry Pi Case and Arm to mount a Raspberry Pi Zero 2 w with Zero Cam to my Prusa MK4. In order to get the Pi to send Pictures to PrusaConnect i used this tutorial on GitHub from cannikin/GitHub:
https://gist.github.com/cannikin/4954d050b72ff61ef0719c42922464e5
Print Settings:
- I used Prusament PETG (but PLA is also fine)
- 0,4mm Nozzle
- 0,2mm Layerheight
- 15% Infill
- Some drawed on Supports on the Arm
Used Hardware:
- Raspberry Pi Zero 2 w
- Raspberry Pi ZeroCam 160° from BerryBase
- Power Supply for Raspberry Pi (cable had a diameter of 3mm for cable channel)
- M3x18 Bolt (Mounting Arm to X-Axis Motor)
- M3x6 Bolt (Mounting Case to Arm)
I hope you like it.
DE:
Ich habe hier ein Raspberry Pi Case und Arm gemacht damit ich meinen Raspberry Pi Zero 2 w mit Zero Cam an meinem Prusa MK4 anbringen kann. Damit der Pi auch die Bilder an PrusaConnect überträgt habe ich hier die Anleitung von cannikin/GitHub benutzt:
https://gist.github.com/cannikin/4954d050b72ff61ef0719c42922464e5
Druckeinstellungen:
- Ich habe Prusament PETG benutzt (PLA funktioniert auch)
- 0,4mm Düse
- 0,2mm Schichthöhe
- 15% Infill
- Ein paar Aufmal-Stützen beim Arm
Material das ich benutzt habe:
- Raspberry Pi Zero 2 w
- Raspberry Pi ZeroCam 160° von BerryBase
- Netzteil für Raspberry Pi (Kabel hat ein Durchmesser von 3mm für den Kabelkanal)
- M3x18 Schraube (Arm an X-Achsen Motor anzuschrauben)
- M3x6 Schraube (Arm und Case anzuschrauben)
Ich hoffe es gefällt euch.