ender 3 s1 pro screen holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.95 – €4.83 net (excluding VAT)
For file: DO NOT PRINT !.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.39 excluding VAT (range midpoint).
- Weight reported by the author
- 63 g
- Print time reported by the author
- 4 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
rotated 90 degrees to the left for printers that stay sideways
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 38
- Makes
- 0
- Views
- 475
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
i needed i made i publish
well you saw a lot of screen holders for this printer but this one is inverted to the side for strange people like myself that keep their printer on the side (like in my case in the closet)
now about printing & installation
printing
1 . print at least 3 layers thick is should be strong enough altho i did with 4 layers
2. supports ! use them ! trees are good :)
3. infill at least 30% ( strong the print force need to be )
installation
nothing special use the two screws that you already have in ur printer use the alen key that … you gusset it you got with the printer
as you can see its very specific print for very specific application but hope you love it as i do and you're welcome to post ur makes here in the comments :)
p.s : the version you see in the photos is v2 and ive changed it a little , in v3 the fitment is much better :)