Mini ITX PC Case Feet KXRORS S300 S400
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed some taller case feet for Mini ITX cases, specifically the KXRORS S300 and S400 to help with bottom air intake
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 118
- Makes
- 0
- Views
- 967
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Designed some taller case feet for Mini ITX cases, specifically the KXORS S300 and S400 to help with bottom air intake.
Original feet are 10mm tall, so I created 20mm and 30mm variants. The 20mm variant height is approximate.
The hole depth is designed to work with the original case feet screws, making for an easy swap.
Printed on 20% infill with no supports. Brim optional for additional adhesion.
I haven't printed the x4 models myself, but included them for those who want to print all 4 feet at once.
Expect about 40 mins per foot on Ender 3 v2 or 2.5 hours for the x4 print.