Silverline Drill Press Simple DRO mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple way to mount a Digital Vernier to my Silverline Drill press for a super cheap DRO
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted to add a Digital Read Out to my drill press on the cheap, so bought the cheapest Digital Vernier I could find off Amazon, designed this clamp to fit around the Quill and fit the end of the vernier into (after a bit of surgery to remove the unneeded jaws and excess length).
The Vernier I used is this one.
https://www.amazon.co.uk/dp/B0947SKCYS?psc=1&ref_=cm_sw_r_cp_ud_ct_3Z8DX60S9JBV247VK8HE
It's all plastic, so very easy to chop down with a hacksaw.
The Quill Diameter is 40mm. - To mount the clamp all you will need a M4x10mm bolt and nut.
The body of the Vernier it attached to the front of the Drill press using the Masking tape and Superglue method currently. I may look to attach it more permanently later.