1 / 11
Lilygo T5 4.7 S3 E-paper display case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case and stand for the Lilygo T5 4.7 S3 E-paper display
- Rating
- 4.5 / 5
- Likes
- 25
- Downloads
- 421
- Makes
- 4
- Views
- 2,548
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a case for the LILYGO® TTGO T5-4.7 Inch E-paper display (https://www.lilygo.cc/products/t5-4-7-inch-e-paper-v2-3) together with a stand.
Please note that this design is only compatible with the “v2.3” or “plus” variant of the board! (The one with 3 buttons on the top)
Screw: M3 x 10mm round head machine screw
Heated inserts: M3 x 6mm
Battery: Li-Polymer 3.7V 2500mAh 50mm x 60mm universal
Instructions:
- Print all three files
- Press heated inserts into the front panel's holes
- Secure the battery in the back (I used double sided tape)
- Insert the Lilygo board into the back (don't forget to plug the battery in)
- Fit the two halves together
- Screw them together
- done