1 / 2
SV06+ X Carriage Extruder Block for Drylin bearings — image 1
1 / 2

SV06+ X Carriage Extruder Block for Drylin bearings

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

SV06+ X Carriage Extruder Block for Drylin bearings

Rating
0 / 5
Likes
6
Downloads
36
Makes
0
Views
347
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

SV06+ X Carriage Extruder Block for Drylin bearings

remixed off of the original sovol files for their injection molded parts

Added V2 which closes up the backside on the belt slit, which gives it a lot less possibility to warp

 

Instructions:

Make sure to verify the distance between your rods. Mine was 26.7mm inner measured from top of bottom rod to bottom of top rod (so not heart-to-heart). Normally it's 27, so you might need to add ~0.3mm spacing between the bearings for the top rod vs bottom rod.

Also bearing insert diameter might differ depending on your printer so that also might need some experimenting.

For me it took 4 tries to get it exactly right, both the rod-distance and the bearing opening diameter.

Tags