1 / 7
Horizontal Filament holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Horizontal filament holder for large and small rolls of filament.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 15
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a filament holder for horizontal or slightly angled from horizontal.
I need to be able to use my 2300g (and bigger) spools on some low shelves in my printer room, and the only way is to keep them horizontal.
I printed on my XL with 0,32mm height on a 0,6mm nozzle with PLA. Infill 15% cubic, but this is a personal preference. As is layer height and nozzle size.
Only support needed is on Angle Adjuster, for the rod and “handle” part.
Part list:
- Printed parts
- 1x 6" lazy suzan turntable (I used one lazy suzan turntable like this from Amazon or Ali Express. I'm sure you also can find similar hardware elsewhere.)
- 1x ø4mmx155cm aluminum or brass tube (or similar)
- 8x M3x5,7mm heat inserts (I use these from CNCKitchen)
- 8x M3 washers
- 8x M3x6mm screws