Robot wheel for 4mm shaft with flat
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.73 – €2.11 net (excluding VAT)
For file: FIT0521_hard_78mm_v1stl_variablelayers_0.2mm_PLA_MK3_2h7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.92 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 2.11 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This a an ~80mm wheel for direct coupling on a 4mm 'D'. This has been tested with the DFRobot FIT0521 motor.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 178
- Makes
- 0
- Views
- 993
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- GNU General Public License v3.0
This design is part of a differential drive robot. The wheels are approximately 78mm in diameter. The wheel can directly couple to a 4mm ‘D’ shaft, where the flat spot is 3.5mm across from the width of the shaft.
The wheel can be used as is printed in PLA or PETG. An optional non slip tyre printed from FLEX can be used to improve grip. The tyre will slip the existing tread and hold in place.
The photos show it printed in 0.2mm PLA. If over-extrusion is negatively impacting the ability to fit the shaft into the hub or m3 nuts for the screws, then I suggest using variable layers to add more resolution to the hub.
Details of the motor seen in the photos is can be found at https://www.dfrobot.com/product-1617.html