1 / 3
TangBand W3-1876S TPU Gasket — image 1
1 / 3

TangBand W3-1876S TPU Gasket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 0.5mm thin TPU gasket for TangBand W3-1876S speaker projects!

Rating
0 / 5
Likes
3
Downloads
30
Makes
0
Views
132
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Share Alike

A 0.5mm thin TPU gasket for TangBand W3-1876S speaker projects!

 

I've made a few 3d printed projects using the W3-1876S such as bookshelf speakers and a subwoofer, and one thing that always suprised me and kinda sucked was no one made a printable gasket for this! so after using blue-tack and gasket foam i decided to make a nice thin printable TPU gasket based on CAD models of the speakers itself.

 

The gasket is quite thin at just 0.5mm. Recommend 0.4mm nozzle, and 0.10mm layer height (0.10mm FAST DETAIL preset for mk4 is good), at least 4 walls on all surfaces, and infill at descretion (at this thickness it should all be walls and solid infill)

Print should take 10 minutes or less!

 

also useful for marking holes, you can print this in PLA to mark the hole spacing for drilling or heat-set inserts~

Tags