1" Scope 20 mil Elevation Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Insert for 1" scope rings to add 20 mil to elevation
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Insert for 1" scope rings to add 20 mil to elevation. Insert between underside scope and rings to give extra range to scope. Been using it them for over 6 months on bench and range. Proving to be very stable holding zero without creep. Probably only suitable for low recoil rimfire.
Update: Thought I had about 0.5 mil elevation drift and checked the ring screws which weren't quite tight. Suspect the plastic has compressed a bit over time. Use something better than PLA and occasionally check screws. I wouldn't and you don't need to use this for Benchrest. This is to extend the challenge out to 200 and beyond.