The Daveley Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Simple Altitude-Azimuth Mount For the Hadley Telescope
- Rating
- 5 / 5
- Likes
- 71
- Downloads
- 362
- Makes
- 6
- Views
- 2,811
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Daveley because I suck at names
Consider supporting my work on Patreon:
https://www.patreon.com/c/Designbydave
Bill of Materials
Item | Quantity | Link | Cost per |
|
uxcell 6812ZZ Deep Groove Ball Bearings Z2 60mm x 78mm x 10mm | 4 | 13.79 | 2x packs of 2 | |
PTFE Tube | 1 | 8.22 |
| |
(Old version) Crosscut Sled for Table Saw UHMW | 1 | 9.59 | old version | |
M5 Heat Set Inserts | ~27 | 9.99 | pack of 50 | |
M5x20mm Socket Head Cap Screw | 12 | 9.85 | pack of 50 | |
M5x30mm Socket Head Cap Screw | 2 | 8.39 | pack of 10 | |
Sky Watcher Star Adventurer Tripod | 1 | 85 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended Materials |
|
|
|
|
Siraya Tech ABS-CF Core Black Filament |
| 37.49 |
| |
3DXTECH CarbonX Carbon Fiber PETG |
| 35 |
| |
3DXTECH CarbonX EZ PC+CF Filament |
| 61.95 |
|
CHANGELOG:
V1.1
Changed dampers to PTFE (Teflon) tubing (bowden tube material) system. Credit to Pelf for the idea - https://www.printables.com/model/893497-hadley-telescope-azimuth-bearing
New Damper Backbone parts to accommodate PTFE tubing.
V1.0
Initial release
EDIT: 4-17-24 - added Rings for Vixen Dovetail mounting for use with stock Hadley and my version. The large hole in the mount base is sized for a ¼-20" heat set insert.
This is a simple mount designed for, and in the spirit of, the Hadley Telescope. It is designed to be mostly 3D printed and assembled for relatively inexpensive while also offering optimal performance characteristics for a small telescope. The support and movement of a telescope is as important as the optics. You want something that is able to support the mass of the telescope without excessive wobbling. For motion, you want something that is very smooth and damped without binding.
Web Site - https://designbydave.net/daveley-mount/
This is designed for use with a standard photo, video or telescope tripod that you may already have. If you don’t have a tripod, the Sky Watcher Star Adventurer with pier extension is recommended.
Both axes are supported via dual, 60mm x 78mm x 10mm (6812ZZ) ball bearings with 3D Printed axles that allow bearing preload to be applied.
Teflon/PTFE or UHMW pads are used to apply damping to each axle.
The total cost to build this mount is around $40 - $60 depending on what hardware you may already have.
FUTURE Development
Reduce overall size of support frame, now possible with smaller profile damper strategy.
A version with M4 fasteners and captured nuts instead of headset inserts
Assembly manual and/or video
Further integrate PTFE tube damping strategy for a more compact, neat looking construction and better tension adjustment control
Go-to drive system integration
Further increase stiffness and improve motion