1 / 3
KUSBA v2 Y-Axis Captive Bed Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A captive, clamping bed mount for the KUSBA v2 accelerometer.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 71
- Makes
- 1
- Views
- 374
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple remix that maintains the print orientation and strength of the original but for the KUSBA v2.
This bed clamp allows you to temporarily mount the KUSBA v2 without damaging your bed.
Bill of Materials:
- 4x - M3 Short Threaded Inserts (4.6mm diameter x 3mm (or 4mm) length)
- 2x - M3x10mm Socket Head Bolts (for lower mounting)
- 2x - M3x4mm Socket Head Bolts (for upper mounting)
Print Settings
- 4 Perimeters/walls
- 25% infill
- 0.2mm layer height
- 0.4mm line width
- 5 top and bottom layers
- Parts are pre oriented in the correct position for printing
- Supports required only for the top overhang of the body (see below)
