Parametric Table Mount - Extender
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the original Table mount - extender - clamp model created by 1llia.
- Rating
- 5 / 5
- Likes
- 215
- Downloads
- 376
- Makes
- 2
- Views
- 2,456
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametric table mount
This is a remix of 1llia's great Table mount extender model. The original model is a really great idea, but unfortunatelly it did not fit exactly to my needs, so I re-designed it from scratch.
You can download and print the original model from here: https://www.printables.com/model/824233-table-mount-extender-clamp
The extender part is now parametric, some small adjustment were made on the screw and a new part (extender mount) was added.
You can download the parametric Fusion 360 file, and 3 different printable versions:
- 150 mm with screw
- 200 mm with screw
- 250 mm with screw
Please note that different version can have different strength and weight capacity, be careful and test if before first use.
Update (2024.04.16)
I have re-uploaded all model files due to the folllowing changes:
- Fillet radius inside the frame was modified to 5mm to increase the strength of the model
- Outside fillet radius was cut to 1mm to have smoother fit to the desk
- Extender mount insert was tightened
Differences compared to the original model:
- the extender can be freely modified in Fusion 360 according to your needs
- you can adjust (for details see the attached pitcure):
- the length of the extender (total length)
- the length of the mount
- the height of the mount
- the height of the frame
- screw diameter (board mounting screws)
- countersink diameter of the screw (board mounting screws)
- two holes were added for easy mounting the board to the model
- the screw was slightly modified
- different design
- 5 mm fillet was added to the neck of the screw to make it more robust
- added an extender mount to the model for special purposes when you need additional support (like in my case)
Adjust the parameters:
Import the f3d file in Fusion 360. Click on the Modify menu and select Change Parameters.
In the popup window you can adjust the necessary changes.
Print instructions:
Same as the original model.
- Material: PETG / ABS / ASA
- Layer high: 0.2 - 0.28 mm for the main body and 0.2 mm for the screw
- Infill: at least 15% and honeycomb type (gyroid works as well, tested)
- Walls: at least 3
- Top/Bottom: also at least 3 layers