Prusa Enclosure Magnetic Ventilation System mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enables the “Original Prusa Enclosure - Magnetic Ventilation System” mod to work with the lid hinge and gas strut mod.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 35
- Makes
- 1
- Views
- 456
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Did you install the lid mod to your Original Prusa Enclosure? Did you also add @MW_3D 's awesome "Hinged lid with gas spring for Original Prusa Enclosure" mod? If you did, did you also want to add @Dsema ‘s awesome “Original Prusa Enclosure - Magnetic Ventilation System” mod but can’t because the Lid hinge and/or Gas Spring/strut hinge interferes with the Magnetic Ventilation Mod? Then this mod might help you out!
This mod works around the Original Enclosure's lid hinge (if installed) and the Gas Strut Hinge mount (if installed). It also conforms to the outside face of the enclosure so no gasket will be needed in my opinion since it's a better fit.
Print Settings:
Material: PETG
Infill: 30%
Perimeters: 4-5
Layer height: 0,2 mm
Support: Not needed
It may not be perfect, but it works and I hope it helps you out! Why not get the most out of your investment!