1 / 5
The 100 Rod cradle with belt fastener — image 1
1 / 5

The 100 Rod cradle with belt fastener

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Rod cradle with belt fastener for The 100 3D printer.

Rating
0 / 5
Likes
9
Downloads
52
Makes
0
Views
361
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Modified the rod cradle and added belt fastener.

ROD CRADLE BELT FASTENER SIDE
Holes for heat inserts or 1 screw for all belts.
My recommendation is to use one 30mm or 35mm screw for both clamps, you may add heat inserts for stability or just use short screws for each clamp but the belt may but to much pressure on the heat insert and rip them out.

 

UPDATE 18/4-24 Added "Rod_cradle_with_belt_fastener_back" model

ROD CRADLE BELT FASTENER BACK

Heat inserts m3 

Use m3x10 screws for the blocks

Have not tested this one on my printer yet but should be working fine.

It should be easier to use this one than the one that claps to the side.

 

UPDATE 26/4-24

After some testing of the strenght of the “Rod_cradle_with_belt_fastener_back” Ive notices that the holes are to big, I will fix this when i

I have time

 

Please leave a like if you like them or comment if there is a problem so I can fix it!

Tags