1 / 2
Toothpick Miniature FPV Drone Race Track
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basic connectors to build a FPV Race track with toothpick (1.75/2 mm of diameter). (V2 for optimisation in progress)
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 26
- Makes
- 0
- Views
- 334
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Hi,
Here is all basic connectors to build an FPV Drone race track from toothpick (1.75 to 2 mm of diameter).
Like so toothpick can be planted in foam or directly on the ground to build your miniature track and show off the path of the drone with some string.
Here is the necessary stuff to build each obstacles :
- Gate : 3 toothpick, 2 L Connectors
- Flag : 20 mm of a side of a toothpick (an entire one can be used, but less aesthetic) and one flag TPU
- Dive : 8 toothpicks, 2 Top Dive Connectors and 2 Bottom Dive Connectors
- ladder : At least 6 toothpicks, 2 T Connectors and 2 L connectors for 2 levels ladder, then add 2 toothpicks and 2 T Connectors for each levels
- Cube : At least 12 toothpicks and 4 Base/Top Cube Connectors for 1 cube, then add 4 toothpicks and 4 Mid Cube Connectors from each levels
Be free to ask or made missing or needed connectors to add to the collection !