1 / 1
model runner/sprue organizer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand to hang model runners from.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 620
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Decided to take a different approach to organizing my gunpla runners/sprues, hanging them above my work area.
Requires:
- 8 ft of 3/8 in. dowel rod
- 6x M3 machine screws
- Masking tape (used to add flags/labels to runners)
Printed parts:
- 2x base
- 2x corner
- 20x hook
Print settings:
- 0.4 nozzle
- 40% infill (adds weight to the base parts)
Assemble:
- Cut dowel rod to the desired lengths
- 2x 1.5 ft
- 1x 2.5 ft
- Use machine screws to secure the short dowel rods into the base and corner parts
- If you have issues with layer separation, use a pin vise to drill the holes to 2.8mm
- Use a machine screw to secure the long dowel rod into a corner
- Slide hooks on to long dowel rod
- Use a machine screw to secure the long dowel rod into the other corner