Dremel Lite Box Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€9.64 – €11.79 net (excluding VAT)
For file: Dremel Lite Box Holder_0.6n_0.3mm_PLA_MK4IS_5h21m (1).bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €10.71 excluding VAT (range midpoint).
- Weight reported by the author
- 246 g
- Print time reported by the author
- 5.35 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Dremel Lite (model 7760) Box insert holder. Suitable for box: https://www.printables.com/cs/model/424239-box
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 99
- Makes
- 1
- Views
- 720
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I like to use the Dremel Lite rotary tool (model 7760).
I have a whole bunch of accessories for it. That's why I decided how to store everything.
From past, I like this stackable box. It has several variants. One of them is half with binders for small parts, and in the other half there is a space where you can conveniently place, for example, a Dremel.
But he was still free here and constantly moving around the box. It was therefore necessary to create an insert in this box so that the tool is fixed here and does not move.
And this is my box insert.
The insert is designed to fit exactly into the box variant: 8přihrádekpulena.stl (from the above source: Box).
Whole box set is:
- 8přihrádekpulena.stl (from the above source: Box).
- 8přihrádekpulena2.stl (from the above source: Box).
- Dremel Lite Box Holder (this printable)
Whole set - box + both insertion - were printed (in my case) with:
- nozzle: 0,6
- without supports
- 3 perimeters
- for a “nicer” look Hilbert filling for the first and last layers
- Gyroid filling
Accessorie for the box itself: M3x40 a M3x25
Dimension of the box itself: approx. 24,5 x 21 cm
Dimension of the Dremel Lite Box Holder: 219,5 x 85 x 60 mm
(with the lower chamfering of the edges copying the box.)
note: the materials of the prints in the picture is Prusa PLA Blend Royal Blue (for Dremel Lite Holder) and Aurapol PLA 3D Filament Blue L-EGO (for box).