Counting matching models…
UPDATE 24.09.2024 8x3mm Magnet Variant added (not tested by me as i dont have those magnets. These magnets may be too strong for this variant) UPDATE 20.09.2024 6x3mm Magnet Variant added INTRODUCTION v2 of my Magnet Insertion Tool, with…
It's a drop-in upgrade of EmGi's 6x2Tip.stl. The better printing orientation is kind of whatever, but I really like that I can now see the magnets as they're being placed. The STL is oriented for printing. I printed two copies on the 1st…
Fiber optic SC connector insertion aid Insertion aid for SC connectors in empty conduits, holes in walls, or shafts. Since the ONT should not remain in the basement, I created this insertion aid. It is important to me in this project to…
Obsolete: GridFlock now has its own magnet jig, with better compatibility. Instructions GridFlock is a gridfinity-compatible baseplate generator with easy press-fit interconnect. It also features friction-fit magnet slots inspired by…
A pipe depth setting tool designed for use with Copper, PEX or CPVC Pipe. Insert pipe into the appropriate size (1/2" or 3/4") and mark a ring around the pipe to indicate proper depth for the SharkBite Push-To-Connect fittings to ensure a…
Two inserts with caps introduced for inserting weights used to balance car wheels
Modification of the 6x3 case, (probably will fit others) A little easier to print in ABS with less open areas.
A kit to put in a bag and forget about for emergencies where you really need to clean your eyes and contact lenses. I printed mine in ABS, but PETG and PLA should work just fine as well.
UPDATELOG: 02.09.2024: 6x3mm Magnets are now supported. 6x2 Picker 24.08.2024: 8x2mm Magnets are now supported. Tip got simplified to a blank bottom surface so it can be used for all magnet sizes 8x2 Picker 20.08.2024: 6x2mm Magnets are…
UPDATE 24.09.2024 8x3mm Magnet Variant added (not tested by me as i dont have those magnets. These magnets may be too strong for this variant) UPDATE 20.09.2024 6x3mm Magnet Variant added INTRODUCTION v2 of my Magnet Insertion Tool, with…
This tool allows safe and easy insertion of the bearings into a fidget spinner. Bearing insertion force is only applied to the outer bearing race.
I love this tool. It's as useful as it was fun to build. My only issue was that the 5x1LevelExtension part is so thin, it takes almost no resistance to bend it, so I decided to make a Thicc version, seeing as there's plenty of room inside…
This is a small part that allows you to easily press down the securing part on the pcb holder.
I needed to replace a 90 degree quick connect fuel connector that was leaking in my car (not good!). This connector needs to be inserted into some semi-rigid plastic fuel line (PA11-6). As I don't have the official tools to do this, I…
Designed for inserting 3mm, 4mm, 5mm, and 5mm diameter magnets into printed projects. Load a few magnets into the 10mm slot in the post in the desired orientation/polarity. These magnets hold the magnet on the tip in the desired polarity.…
English The HBS 32 vario band saw from Scheppach has a round plastic table insert. This naturally wears out during normal operation. Fortunately, some spare parts are still available for this old machine from the early 1990s. Parts such…
Cart coin & belt insertion, to be used for shopping carts, but also for making seat belt alarm off ( only for parking or short car moving, not while driving ! )
I made adjustments to the body and container design for the 8 x 3 magnet (as EmGi had stated, it had not been tested).
This post is basically for a cap to finish off some aluminium corner profiles I am using. There is a CAD file that replicates an Aluminium or aluminum Corner profile for a 38x38 dimension that fits 15.5mm MDF or Plywood. The profile is…
A great idea to save leftover filament is to insert it into your prints. Above is a stackable tray design that uses small pieces of filament to create an unusual texture. Print include 2 parts, base tray , that should be one and stack…
A great idea to save leftover filament is to insert it into your prints. Above is a stackable tray design that uses small pieces of filament to create an unusual texture. Print include 2 parts, base tray , that should be one and stack…
A great idea to save leftover filament is to insert it into your prints. Above is a stackable tray design that uses small pieces of filament to create an unusual texture. Print include 2 parts, base tray , that should be one and stack…
This Magnet Insertion Tool (Low Profile) simplifies the task of inserting magnets in 3D prints - ensuring that the polarity of all inserted magnets is the same. Its low profile makes a quick and easy job of inserting magnets during a…
Some would consider the process of feeding flimsy filament through a 2mm hole less than ideal. Surfalex2000 published a remix of a filament guide which simplifies this process. Adding flexible filaments to the mix, it is further…
IKEA KALLAX Flaschenregal Einschub Bottle rack box insertion Category: Containers
I really liked DJG3's Filament Sensor Funnel remix of Surfalex2000's Filament insertion guide as a way aid in directly feeding TPU filament but I did not have any PC4-M6 fittings for the back end for my PTFE tubing. But I did have some…
This is a remix for the lever part from EmGi's excellent Magnet Insertion Tool. https://www.printables.com/model/1008467-magnet-insertion-tool-v2 The Magnet Insertion Tool is an awesome design. However I had troubles with the rubber. No…
Extruder Connector tool, to help align extruder motor connector onto the board and wire picks for wire restraint pathway placement. The connector tool has two ends with opposite shelves. One end works best with the motor plug. “M” Tool…
I may have had a couple too many ICs to insert in circuit boards… and trying to get the pins to go in straight was annoying me. I designed this tool in an attempt to make my life easier. Quickly pop an IC in the tool - tool bends IC pins…
Inspired by the Extrutim model: https://www.printables.com/model/473485-cable-insertion-tool-split-wire-loom-tubing I designed it for mounting the Prusa Core One kit. This one is slit on the side to easily insert the electrical wires. On…
This model can hold a Faber-Castell sharpener and catch the filament shavings when sharpening. Setup: Simply insert the sharpener into the hole and screw down the lid. Usage: To sharpen the filament, insert it through the hole and twist…
This is a flared PTFE guide that goes on the end of a PTFE tube to help with insertion of filament into said tube. If I don't have my reading glasses on, this is a nice helper. If you want to do two color pieces, add a filament change in…
I really like Phil Caruso's Magnet Insertion Tool, and I just started organizing my 3D printing tool area with Gridfinity. So obviously I needed a bin for my two copies of the tool, too, but couldn't find one just yet. It's my first…
It's a drop-in upgrade of EmGi's 6x2Tip.stl. The better printing orientation is kind of whatever, but I really like that I can now see the magnets as they're being placed. The STL is oriented for printing. I printed two copies on the 1st…
INTRODUCTION This is a slightly diffrent version of the original free Magnet Insertion V2 tool. The Function is the same, but the Case is diffrent. PRINTING All parts are already in the correct orientation. “Tip” is the only part that…
This is the same as this- https://www.printables.com/model/1007864-hearing-aid-insertion-tool except except with 2 slits
Inserting small magnets into 3D prints can be frustrating – especially without proper tools. This compact Magnet Applicator is designed to make the process fast, safe, and aligned. Simply place a 6x2mm round magnet into the cup, insert…
This tool allows you to insert either 16mm or 18mm eyes into vinyl doll heads. The basic process (as described in many videos) is to heat up the vinyl and press the eye into the socket. The tool allows you to do this with either crushing…
Tool for Sapim Polyax Nipples with slot to guide the spoke nipple through the rim to the spoke and screw on the first few turns. Replaces the cut-off cotton bud for me. I would have liked to make it round, but it prints much better and…
Hook the Magnet Insertion Tool to the Ikea Skadis board. Print the model without support. There are break away supports which are marked by an “X” (see picture below).
Tool for installing high pressure seals in a pressure washer. Specific to the general Pump TS1810 but I included the F360 files if you want to modify it for your needs. Works like the Intergroup pump ZMVTOOL. Printed at a low layer height…
XT30 Link Insertion Tool Designed to allow for a more positive insertion of a recessed power link, leading to a more reliable device.
Plugs should be printed with TPU. The tool does not really matter, anything non-flexible will do. :) Plugs to keep the silicone in place when changing the motor cable. plug with a hole - cable side full plug - empty side A tool to insert…
toujours a la recherche de la meilleur protection pour mon dji o3 j ai rajouté la possibilite de mettre un verre de protection “incassable ” en 27x27 voici le lien du verre en photo ci joint :…
If you don't have a fitting metallic nut for the Samsung Galaxy S7 Edge Tripod Mount by AntoDelG , you can center the attached thread into the nut hole of the original part within the slicer. To be able to print without support, I changed…
Tested on Prusa XL Z axis rails. Tool to insert the linear rail carriage on the rail without losing balls.Tested on Prusa XL Z axis rails. Tool to insert the linear rail carriage on the rail without losing balls. The opening width of the…
I edited the Skadis double mount for the magnetic insertion tool so it can be mounted on a regular pegboard. Printed with supports for the pegs.
The P-01 can use longer mags but there is a risk of over-insertion when reloading with the slide locked back. These will help. For two different mag models, can't recall the exact models.
Insert the magnet in the hole, glue it in place if it's a bit loose. Then, you can attach another magnet to the one in the holder to insert it where you want it. This should work for 2mm x 2mm magnets also, but I haven't tried it. I made…
IKEA KALLAX Flaschenregal Einschub Bottle rack box insertion Category: Containers
Fiber optic SC connector insertion aid Insertion aid for SC connectors in empty conduits, holes in walls, or shafts. Since the ONT should not remain in the basement, I created this insertion aid. It is important to me in this project to…
Just print in high resolution as recommended for the original and add a stop in the Prusaslicer to insert the magnets during the printing process. Holes fit 4x2 mm neodymium magnets. Since the tool is light no stronger magnets needed. It…
Gridfinity rebuilt bins can hold magnets with friction-fit only, without glue. Inserting the magnets can be a bit finicky though, especially if the model is configured to hold them snug. This jig makes inserting magnets easy. Each magnet…
Obsolete: GridFlock now has its own magnet jig, with better compatibility. Instructions GridFlock is a gridfinity-compatible baseplate generator with easy press-fit interconnect. It also features friction-fit magnet slots inspired by…
[EN] Stop fighting with magnets and messy glue! This tool is a game-changer for anyone who incorporates magnets into their 3D prints. It allows you to load a stack of magnets (e.g., 15 pieces of 4mm diameter) into a dedicated magazine and…
Pushed around quite some vertices in Blender to make it like this. The nut can now just be placed, not a 'tight fit', but the profile will keep it in place fine.
A pipe depth setting tool designed for use with Copper, PEX or CPVC Pipe. Insert pipe into the appropriate size (1/2" or 3/4") and mark a ring around the pipe to indicate proper depth for the SharkBite Push-To-Connect fittings to ensure a…
Two inserts with caps introduced for inserting weights used to balance car wheels
I needed a way to easily press multiple magnets into my 3d printed parts, and it was a pain trying to keep the polarity the same with each magnet and not drop any. Not to mention it is a little hard on the thumb to press them in…
Modification of the 6x3 case, (probably will fit others) A little easier to print in ABS with less open areas.
A kit to put in a bag and forget about for emergencies where you really need to clean your eyes and contact lenses. I printed mine in ABS, but PETG and PLA should work just fine as well.
Just a simple magnet tool for inserting 2mm diameter x 1mm tall magnets. One has a tiny recess with a positive symbol and the other has a negative symbol. So either print those symbols with multiple colors or just print the entire thing…
A simple contact lens insertion tool for the moments you get caught out. If you are FDM printing this, then be sensible - use it, and then throw it away - this is no substitute for a medical grade, injection moulded part - it is intended…
Custom LED scleral lens insertion model. I built this using the LED lights available on Amazon (link below) to help guide the lens during insertion. I use the flashlight’s lowest brightness setting. I also cut the bottom off my DMV…
All the buckle receptacles on my bike bags crumbled apart, Vaude's own repair service could not repair it. Pry off the original insertion ends, and glue these in with a flexible contact glue. (Current cover photo is outdated, the v4 here…
Pen tube insertion tool. Keeps fingers out of the glue. Perhaps a little longer than I needed (didn't have a dimensioned prototype to copy). Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 200…
IKEA KALLAX Flaschenregal Einschub Bottle rack box insertion Category: Containers
This handy little piece turns a regular M3 nut into a T-nut that fits into a 2020 / 2040 extrusion ( e.g. Ender 3 frame ) in order to attach anything. Some pictures show an original Ender 3 M4 T-nut for comparison. Prints best with no…
IKEA KALLAX Flaschenregal Einschub Bottle rack box insertion Category: Containers
I've included a wall B test piece to try out here. The rest of the parts are available on my Gumroads Store , pay what you think it's worth! These are magnet insertion and drill guides tools for Axolote Hex walls styles A, B, C, BAB, CC,…
A simple tool to align and insert the nock in the arrow shaft. So far the tool was only tested with Easton nocks but should work for most. I recommend printing it with 100% infill
This guy lets a regular M4 nut become a wing nut / butterfly nut for various applications. Simply push the metal M4 nut into the side slot. Should fit tightly. Prints with no supports. The output shown in the featured image is at 0.10 mm…
Description The microSD card of the Bambu Lab X1 is a bit too deep inside the touchscreen; this tool eases extraction and insertion of the microSD card. I don't want to risk damaging the device by messing around with a sharp object or a…
These gauges allow you to quickly slide them over a specific size of PEX, CPVC or Copper tubing to check the insertion depth and mark it. This way you can cut tubing to the perfect length prior to inserting a PEX fitting.
A back end grip that combines the beavertail and the back grip together, as they had no way to really attach. The front grip has 2 variants to expose the trigger pin hole left or right. It was impossible to secure the grip with the…
Rather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically. You can use the attached .3mf file as a starting point…
I needed to clean some old ball bearings, and hands were too shaky to do it by hand. figured I could make a jig on tinker CAD, and it works well. Simply remove the collar around the balls, place the jig onto the side of the bearing. push…
Remixed to move the insertion slot to the front to prevent filament popping out during prints. UPDATES 14 Mar 2023: Made the slot v-shaped and also diagonal to make it harder for the filament to pop out
HEBDI is an insertion aid for the filigree charging cable of the iPhone or iPad, Samsung S7 and S8. Once mounted firmly to the cable, it simplifies insertion and removal of the charging cable. For whom? HEBDI is primarily intended for…
Solid window divider bin, designed to be paused for glass slide insertion. For Prusa Slicer, use the layer slider to find the first layer you see the bridge go over the glass slide, and add a pause there. I've tested this on 4 bins at a…
I have customized the filament guide for the Ender 3 V2 (Neo). Additionally, I have added the feature that makes it easy to insert and remove the filament!
The original design is based on a drawing presented on the MGAguru website. it is suggested that this too be made from a soft aluminum and as I don't have a lathe I wondered if a tool set made from PETG would do just as well. To get a…
I made this remix of the design made by HD_Creator ( https://www.prusaprinters.org/prints/42971-t-nut-for-pursa-mini-extrusions-groove-8-type-b-m4/comments ) because it feels safer to screw against a metal nut instead of the plastic. Also…
A tool to easily insert cables into split wire loom tubing. I created this tool for a friend in sizes 8.5mm, 10mm and 13mm. If you need another size you can just take the 10mm version and scale it. Please leave a like if you enjoy my…
After I installed the SUNLU dryer on the top FLSUN V400, I was faced with the problem that the filament does not always pass well through the sensor, it sometimes jumps to the side and does not want to pass through the sensor. With the…
This is a remix of a very nice design, but updated to improve on a few things: Mounting tabs shortened by ~1mm to fit the DCD805/DCD800 (and possibly other newer model drills/drivers). Should still fit older designs. Magnets mount via…
This is a tool for quickly inserting wire bundles in to split looms, sheaths, or wraps. This video shows how the tool is used. There are versions for ½" and ¾" wraps. CAD on Onshape
Uses the lever and insert from the remixed file. This remix adds a lip around the top-rear side of the hole, preventing over-insertion of the talon mag in the adapter. Tested with a Stryfe, may work on others too. Also uses M3 socket-head…
This is a scleral lens (hard contact lens) insertion tool. Designed for my mother who has a rare form of macular degeneration and double cornea transplants. Scleral lenses can be difficult to insert due to their size, shape and need to be…
And I mean really annoying, annoying enough that I made 5 versions of this just to get two lamps replaced. Fusion model if you need to adjust angles or something https://a360.co/3OaDSRO
Found this design on the other site (thing:589565 by ksanalytical) but I had a hard time running it through the mesh loom I have (similar to what's on Prusa machines) so I recreated it and added a way to pull it and to add a zip tie or…
After seeing the Funnel from Marobi1958 i thought that it is actually a good idea for inserting Filament easier. I just had improvement ideas. The opening is more agressiv, which should allow easier insertion. The PTFE side is…
simple remix to allow numerals to pushfit easier
A little jig to help with lining up and inserting magnets into the pockets at the bottom of the bins. There is a press fit magnet spot on the top (or bottom depending on your perspective) to hold a magnet so that you can keep your magnet…
I just wanted to add a visual indicator to know when the filament was inserted into the extruder.
Holder for the heat inserts insertion helper tool. Can be mounted with two screws to the wall. Print it in standing position otherwise the clamp may fail If the clamp is too tight for the soldering tip, you can heat it a little bit and…
I originally downloaded a similar model, but it was too tight and could not be used on my backplate. That's why I made my own and allowed for shrinkage after printing when designing. Fits perfectly on my backplate. I recommend printing…
*** Update 22/12/2023 *** Added a version with webs between the legs and the angled tube, to make it easier to insert the tool into the tube, and to add strength to the legs. Inserting cables into long lengths of split convoluted tube can…
