Gridfinity-Bin (5x3) for two Magnet Insertion Tools
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.95 – €8.49 net (excluding VAT)
For file: Gridfinity_5x3_2x-Magnet-Tool-Insert_0.4n_0.2mm_PLA_MK4SMMU3_4h49m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.72 excluding VAT (range midpoint).
- Weight reported by the author
- 157 g
- Print time reported by the author
- 4.82 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A 5x3 Gridfinity-Bin with base-magnets (6mm x 2mm) that can hold two of @PhilCaruso's great "Magnet Insertion Tool".
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really like Phil Caruso's Magnet Insertion Tool, and I just started organizing my 3D printing tool area with Gridfinity. So obviously I needed a bin for my two copies of the tool, too, but couldn't find one just yet. It's my first design of a Gridfinity Bin with a cut-out, and it was easier to create than I feared.
If someone needs a variation of the bin (e.g. with just a single cut-out or in a different orientation for a smaller grid-size), leave a comment below and I will try to upload these, too.