Magnet Insertion Tool 6x2 Premium Skin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improved Tool with Magnet Magazine, Optimized shape rubber suspension and automated Reloading
- Rating
- 0 / 5
- Likes
- 1
- Makes
- 0
- Views
- 148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
INTRODUCTION
This is a slightly diffrent version of the original free Magnet Insertion V2 tool. The Function is the same, but the Case is diffrent.
PRINTING
All parts are already in the correct orientation. “Tip” is the only part that requires Support Material.
I printed everything in PLA. 0.2mm Layer height, 0.4mm Nozzle on a Anycubic kobra 2 Pro.
FILAMENT
i used PLA+ from Elegoo but any other Pla should work as well
HARDWARE
This Device was tested and works with the following Sizes
- 6x2mm
Should work with 5x2mm mangets as well
Other Hardware you need:
- 2x M3x6mm
- 3x M3x10mm
- Rubberband
- 3x Magnets of selected size
ASSEMBLY
There is a PDF attached to the files with assembly instructions as well as some simple Assembly steps shown in the Video
I reccomend printing 2 tools. 1 for each pole of the magnet. I printed one in Red and one in blue.