1 / 9
Prusa MINI/MINI+ Squash Ball Feet System & Spool Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by some amazing models, Squash Ball Feet System for Prusa Mini/Mini+
- Rating
- 4.968 / 5
- Likes
- 593
- Downloads
- 1,827
- Makes
- 110
- Views
- 13,710
- Reviews
- 95
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of Squash ball feet for Prusa Mini. All brackets bolt into aluminum extrusions and support the electronic's box.
Highlights:
- Massive Noise Reduction
- Improved Stability (Lifting the magnetic sheet won't tilt the printer)
- 6 Support Points without increasing operational footprint.
This is inspired in https://www.thingiverse.com/thing:4752965 from jrjonescan, I love the weight distribution and support points choice. But it was too bulky, so I recreated the low profile from Vektor.
- Print 3x Single Foot (If you are going to use the Spool holder print only 2x)
- 1x each other model
You will need:
- 6x Squash Balls (double yellow dot)
- 5x M6 x 12mm Bolts
- 5x M6 T-Nuts
- *If using the spool holder setup, you will also need:
- 2x 608 bearings. Alternatively, you can reuse the originals from the mini Spool Holder.
- 1x of the Original Prusa Mini Foam Feet (The spool holder includes a slot)
Spool Holder:
This is a remix of the popular Spool Holder from Max with the Squash Ball foot + the "Filler" Filament Roller.
Print instructions
- .25 layer
- 3+ perimeters
- ±30% infill
- Minimal Support ( set overhang threshold to 5º, so supports is added only to critical areas)
- PLA / PETG