1 / 2
Grohe Aqua Tunes holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement holder to Grohe Aqua Tunes.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
The Grohe aqua tunes holder broke so I cadded a new one in Fusion 360 and printed in PLA with 0.30 layer using 0.6 nozzle and 15% infill. I used organic supports. Use two M4x30 screws to fix it and re-use the M10 insert bolt from the original fitting.
(The screws in the picture are sunk into the end piece in the .stl attached here - I modified it after taking the picture.)