Outdoor Spotlight Lithophane Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My wife's dog had to be put down last month due to an unexplained illness.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 21
- Makes
- 0
- Views
- 542
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My wife's dog had to be put down last month due to an unexplained illness. I made an outdoor memorial lithophane using a solar led spotlight. We plan on putting it where we will spreading the ashes.
Print instructions
Category: Outdoor & Garden Print Settings
Printer Brand: MK3
Printer: Prusa i3
Rafts: No
Supports: No
Resolution: .2
Infill: 15
Filament: ESun ePC Black
Notes:
It's best if you print the holder in a dark non-translucent material that can withstand being outside. I would also recommend that the lithophane be printed in the same fashion. PETG should hold up pretty well.
How I Designed This
I used http://3dp.rocks/lithophane/ to make my lithophane. The model settings that I used are as follows...
Max Size 150mm
Thickness 2.5mm
Border 3mm
Thinnest Layer .08mm
Make sure that you download the "Outer Curve" version.
I will have to apologize. I can't remember exactly which light this is. I know that I bought it last fall. I believe that it's this one but not entirely sure. I'm fairly sure that it's this one
https://www.acehardware.com/departments/lighting-and-electrical/outdoor-lighting/landscape-and-deck-lighting/3637535. This may not fit everyone's style of spotlight.
I found that the screws needed to be just a little bit longer to make a really good fit. I also added some hot glue between the holder and the inside ring of the spotlight.