Outdoor Spotlight Lithophane Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My wife's dog had to be put down last month due to an unexplained illness.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My wife's dog had to be put down last month due to an unexplained illness. I made an outdoor memorial lithophane using a solar led spotlight. We plan on putting it where we will spreading the ashes.
Print instructions
Category: Outdoor & Garden Print Settings
Printer Brand: MK3
Printer: Prusa i3
Rafts: No
Supports: No
Resolution: .2
Infill: 15
Filament: ESun ePC Black
Notes:
It's best if you print the holder in a dark non-translucent material that can withstand being outside. I would also recommend that the lithophane be printed in the same fashion. PETG should hold up pretty well.
How I Designed This
I used http://3dp.rocks/lithophane/ to make my lithophane. The model settings that I used are as follows...
Max Size 150mm
Thickness 2.5mm
Border 3mm
Thinnest Layer .08mm
Make sure that you download the "Outer Curve" version.
I will have to apologize. I can't remember exactly which light this is. I know that I bought it last fall. I believe that it's this one but not entirely sure. I'm fairly sure that it's this one
https://www.acehardware.com/departments/lighting-and-electrical/outdoor-lighting/landscape-and-deck-lighting/3637535. This may not fit everyone's style of spotlight.
I found that the screws needed to be just a little bit longer to make a really good fit. I also added some hot glue between the holder and the inside ring of the spotlight.