Parametric Funnel for Fluids (FreeCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed some funnel to change some fluids from one bottle to another bottle. Or the Rest of fluids from the old into a
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 107
- Makes
- 0
- Views
- 462
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed some funnel to change some fluids from one bottle to another
bottle. Or the Rest of fluids from the old into a new bottle or
simular.
But the most bottleneck have a different diameter.
So I made a parametric funnel in FreeCAD.
You can change the diameter in the Spreadsheet:
*_in means: Put it in the bottleneck (lower bottle)
*_out means: Put the bottleneck into the Funnel (upper bottle)
t_wall is simply the thickness of the wall
Put the bottles in a corner and the gravity do the work.
Hint: Use different Colors for more then one funnel.
I'm using:
PETG Black and Orange
0,4 mm Nozzle
0,2 mm Layer
Attention: The 3mf-File was made for Prusa MK4.
On satin- and structure- metal sheets disolve the funnels (Here 2 times).
The stl- and 3mf-Files are samples.
A note to the Fotos from "Hygiene Spray":
After cleaning the empty bottle I'm using it for moisting plants.
Or cleaning the headbed of my 3D-Printer.
Sorry for my bad english