52mm (2-1/16th) Panel Hole Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A basic hole cover to fill in 52mm holes in any panel / dash / fascia.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 44
- Makes
- 1
- Views
- 109
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
A basic panel / fascia / dash hole cover designed to pop into and fill holes of 52mm (2-1/16”) diameter and approximately 3mm thickness.
Material should be chosen to suit the application, however, for anything in cars or boats etc that will be in the sun it should be PETG as a minimum.
Supports will be required unfortunately and care should be taken during removal to ensure the locking tabs aren’t broken if printing with the face down. Layer height and line width aren't particularly critical, the example shown was printed at 0.2mm height and 0.6mm width.