Ground Anchor Driving Nut
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This ground anchor driving nut makes it easier to drive anchors into the ground for swingsets or trampolines
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This ground anchor driving nut makes it easier to drive anchors into the ground for swingsets or trampolines.
I was having difficulty installing ground anchors for my children's swingset. It was difficult to install by hand into the hard ground. I designed this to make it easier to install and remove ground anchors. It uses a 1" nut on one side so you will need a 1" socket. I found using a drill is better than a driver, as the driver can be hard on the printed piece. I start the anchor through the grass by hand and then use the nut to drive it in the rest of the way. I have used 20+ times now without it breaking.
It worked for these anchors, but I suspect it will work for others that look like this: https://a.co/d/ekIflfu
I recommend printing at 100% infill and I used 0.8mm nozzle to get a 0.32mm layer height. I printed in PLA+ and it is holding up so far.
Check out our website: www.mcmaker3d.com