1 / 5
10 kg huge filament spool holder — image 1
1 / 5

10 kg huge filament spool holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a big roller spool holder for huge filament spools

Rating
0 / 5
Likes
5
Downloads
61
Makes
0
Views
429
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

When I ordered 10 kg of filament I never imagined i would get a single 10 kg spool… so i had to find something big to handle it. 

I found the original model from Hardy74 great - simple and strong - but it didn't fit my 10 kg filament roll so i made a variant with PrusaSlicer directly. 

This nice slicer allows cuts in model so i just needed to had the missing parts to reach the desired width which are now 260 mm for the base and 230 mm for the rolls. I didn't change anything else.

I use both PrusaSlicer and Cura depending on the project, but here PrusaSlicer is recommended.
The 3mf file is for PrusaSlicer ONLY. It contains both the widened base and roll models.

I also included the stl from the base and the roll if you want to slice with another software.

Be aware that the 3mf includes some infill variation - 100% for the first and last 13/14 mm of the roll -  to make the rolls sturdy enough. 
At first i didn't do that and a roll axis broke under the weight (strangely it continued to be usable, meaning i think the initial modeling was good). 
With 100% infill at both extremities the rolls are really strong and didn't move since.
If you don't use PrusaSlicer you'll probably have to set it again. 

Resolution : 0.28
Infill : 20 %
Standard PLA
Support : yes, for the rolls. Again, the 3mf file is correctly set.
Bed adhesion : raft for the rolls, brim for the base. 

Tags