Solar Shield - Stevenson Screen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a solar shield, aka Stevenson Screen, for large sensors.
- Rating
- 4 / 5
- Likes
- 30
- Downloads
- 205
- Makes
- 1
- Views
- 1,255
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Open Community License v1
This is a solar shield, aka Stevenson Screen, for large sensors. It has an interior height of 100mm and interior diameter of 76mm. It uses M4 threaded inserts for assembly of the screen to the base. The interior has a small ring pedestal for the sensor, that is glued in place. It also has a top cone for shedding snow, that is also glued into place. Some supports are required for the threaded insert areas.
Pictured model printed in Prusament PETG Signal White.
Holes for metal inserts are sized for the CNC Kitchen M4 inserts.
https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m4-standard-50-stk-pcs
The design is my own, but was inspired by other models linked below:
https://www.printables.com/model/235525-solar-radiation-shield
https://www.printables.com/model/182626-temperature-and-humidity-solar-radiation-shield
https://www.printables.com/model/686154-solar-shield-for-sensor-with-wallmount
This was designed for an emonTH sensor that is part of the Open Energy Monitor project.