Dice
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D Printed 6 sided dice! Made on TinkerCad, with rounded edges. 20 Minute Print!
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 62
- Makes
- 0
- Views
- 292
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Public Domain
3D Printed, 6 Sided Dice! Made On TinkerCad, with rounded edges, and is an easy print. The dice. are regular size, and take just over 20 minute's to print!
Infill: For the dice infill, I use either 100% infill or Gyroid, for the best result.
Numbers: The dice has 6 sides each consisting of a mark, 1-6. I recommend using white, or any light-colored filament, so the marks are easier to see. I use a Sharpie®, or any other black, or colored marker, (that's not to thick). I just make a quick dot on each hole, so that the numbers are easier to see.
Recommendations: The slower the dice is printed the better, any stringing, layer shifts, or just bad quality, can affect the dice from rolling.
Enjoy!