1 / 1
Heatpress idler wheel for 625Z bearings — image 1

Heatpress idler wheel for 625Z bearings

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I didn't want to order another size bearing when building this so I remixed the top pulley to use 625Z bearings.

Rating
0 / 5
Likes
9
Downloads
87
Makes
0
Views
421
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I honestly don't know where else I would end up using any 10x15x4mm ball bearings that the original heat set press model calls for, so I snagged one of the two bearings from these rollers that I had ordered for the project (easily popped out using a 12-13mm socket - and you end up with two bearings!

I personally skipped the M4 heatset insert and screwed directly into the holder with an M4x13mm hex head bolt.

You might need to scale the wheel up or down a bit depending on your choice of filament. 

Printed here with Matterhackers Build PLA which was a snug fit :-)

Tags