1 / 2
Prusa Enclosure Transport Handle with PTFE Pass-through — image 1
1 / 2

Prusa Enclosure Transport Handle with PTFE Pass-through

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A remix of Prusa's transport handle, with added pass-through for filament feed PTFE tube and fitting.

Rating
5 / 5
Likes
15
Downloads
63
Makes
2
Views
562
Reviews
1

Updated at source:

Model information

License
GNU General Public License v2.0

A version of Prusa's transport handle with PTFE tube passthrough and PC4-M10 fitting.  Also inspired by @Spitzspot's model #285197, but I needed to feed from the left side and wanted a straight PTFE entrance channel.

No supports required.  If using PETG, which doesn't have great bridging, supports can make the lettering look better but supports may be hard to remove since PETG supports tend to bond a bit.   

External hole is “press-fit” for 4mm PTFE tube.  Internal hole is sized for a PC4-M10 fitting to cut it's own threads.   (I recommend two separate lengths of PTFE; one from your dryer/drybox to the handle, and another from the PTFE fitting to the printer's PTFE fitting. The two pieces should butt together inside the handle.)

Tags