Ender 3 Bed Level
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.07 – €0.09 net (excluding VAT)
For file: 0_5m_0.20mm_220C_PLA_ENDER3.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.08 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 4.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a simple bed level model/gcode to help with bed leveling.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 657
- Makes
- 0
- Views
- 1,413
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Summary
This is a simple bed leveling model/gcode I made in Fusion. I have not been able to find any bed leveling models like this so I decided to make my own. Print with no skirt or brim. It should only have two retractions for the whole gcode. I included a 0.6 mm version as well as a 0.4 mm version because I know many people prefer that. Enjoy!!!
How to Use
If the filament sticks to the bed and it feels round and not smushed then you have probably leveled your bed properly. If it doesn't adhere, then raise the bed. If it does adhere but feels smushed, then lower the bed. If it doesn't adhere but feels smushed then you have bed adhesion issues. Try printing at a higher temperature for the initial layer.