10x2mm Magnet PCB Standoffs - BeagleBone, Raspberry Pi & More (M2.5)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are standoffs designed to let you mount boards to metal pieces using 10x2mm Neodymium Magnets.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 326
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Make sure to add the pause in your Slicer of choice on layer 12 before printing so you can insert magnets!!!!
These are standoffs designed to let you mount boards to metal pieces using 10x2mm Neodymium Magnets.
The 3MF files have 10.2x2.2mm holes so you can pause the print, insert the magnet and then resume printing, resulting in perfect little holders for boards to any metal surface.
The top is meant to have a M2.5 screw fit into it (as is standard for most Single Board Computers such as Beaglebones, Raspberry Pis etc.)
Verified to work well on Beagle-Y, BeagleBoneBlack, BeagleBoneAI, Raspberry Pi 4 and 5 and more.
Printed in PLA with 0.2mm Layer Height on Bambu Lab X1 (I print 12 at a time normally)