Wago Distribution Plug Dock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It is a box for quickly and safely connecting/disconnecting equipment to be tested with power supply.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 25
- Makes
- 0
- Views
- 395
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
New version here: https://www.printables.com/model/1482402-fast-connect-dock
Here is a model that I finally designed because every day in my work I have to quickly connect / disconnect for testing equipments that does not have a power outlet and must be connected directly with the wires with wagos. With this dock, handling is very quick and more safe.
I recommand to print it in ABS Nozzle 0.4 mm Layer height 0.2 mm, infill 40 %.
Use a 20mm KCD1 Led switch ( 6A max), a in-line fuse holder, a 16 mm cable gland, a power cord ( to plug it into any outlet).
4 countersunk head wood screw 3 x 20 mm.
and 3 Wago 221-415 ( 5 wires )
Wiring like this exemple ( I soldered the switch legs because space is limited). The wagos are powered from inside the box.
Obviously this DIY device is safer than connecting the wires one by one with the wagos because you cannot make a mistake and unplug from the wrong power side (it's stupid but it can happen and very dangerous) but however it is not a safety equipment that meets electrical standards and you must use it at your own risk.