1 / 1
Timber Tech deck board spacer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer for Timber Tech deck boards. The sides and holes are at the recommended spacing, if you slip it over the board.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 82
- Makes
- 0
- Views
- 592
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — NoDerivatives
This is a spacer for Timber Tech deck boards. The sides and holes are at the recommended spacing, if you slip it over the board. If you print it with the holes on the buildplate, it will print the holes nice and round (they are .125(1/8) inch diameter by the way) and you don't need any support or platform adhesion.