1 / 2
Creality CR Scan Otter Magnetic 3D Scan Marker Tray for Hardcase — image 1
1 / 2

Creality CR Scan Otter Magnetic 3D Scan Marker Tray for Hardcase

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A small tray to store magnetic markers, which replaces the owl that comes with the CR Scan Otter.

Rating
4.909 / 5
Likes
101
Downloads
826
Makes
11
Views
4,153
Reviews
11

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This tray replaces the owl that is provided with the CR Scan Otter and allows for storage of up to 12 magnetic markers. 

I modified the marker pyramids to use magnets with a diameter of 6mm and a thickness of 5mm. But the original pyramids with 10x3mm magnets also do fit in here. They are meant for 10mm reflective markers.

Since the bottom of the tray had to be tapered, the bottom row of the markers has to be inserted upside down. For the top row I would recommend to install the magnets in the opposite direction. This way the markers sit tightly in their position and don't wiggle around and you can easily pull out both markers by grabbing the top one. If all the magnets are alligned the same, you can also flip the top row upside down, but the markers might be a bit lose in this case.

I printed the tray in ASA which creates a nice friction fit in the hardcase. If printed in another material it might be necessary to scale it down a tiny bit.

 

Tags