1 / 5
GearUp Dice Thrower II
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This design reduces the size and print time of the previous Dice Thrower.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 318
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
This design is based on my previous larger design that has a larger base. This design needs much less time to print than the previous one.
The gears were downloaded from McMaster Carr. The ratio of teeth between the gears is 60:15 (4:1). So, to turn the thrower gear 90 degrees, the larger drive gear needs to turn 1/4 as much, or 22.5 degrees (if my math is correct). Since there is a very small load, not much torque is needed to throw the dice as fast as you wish.