Flashlight Diffuser for Fully Printed Flashlight
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.01 – €1.23 net (excluding VAT)
For file: 9v Flashlight Sphere Diffuser v1_0.15mm_PLA_MINI_1h13m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.12 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.22 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Flashlight diffuser for the fully printed flashlight.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 1
- Views
- 118
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
These are diffusers that fit the fully printed flashlight. Replace the original bulb conductor with this threaded one, then pick your diffuser and screw it on.
I have found it most usable to actually glue the diffuser to the bulb conductor after the bulb is installed. It does mean you have to have a separate led for each diffuser, but the led will last long enough to not worry about burnout, and it makes the diffuser much easier to use to turn the flashlight on and off.