Spiral staircase dice tower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dice tower with a spiral staircase
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 42
- Makes
- 0
- Views
- 306
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution — Noncommercial
This dice tower was primarily made as a dice tower which is magnetically attached to GM screens in this case wyrmwood GM screens. The other version was made later which is just dice tower you can customize.
There are 2 models Customizable and Magnetic.
Customizable
This model is a base you can customize to your liking and attach to some terrain or add something on top. There are 4 holes for M3 screws on the bottom of tower that are spaced 20x20 and 4 holes for M3 in the “Cap_Modular” spaced 50 x 50. “Cap” and “Cap_Modular” are interchangeable.
Magnetic
Magnetic is one for magnetic GM screens. It is made out of 4 parts, 3 parts are tower and the last one is cap on the top. In my case I have connected them with screws for plastic.
Magnetic parts to buy:
4 x Magnets Φ18x3
14 x Screws for plastic 3x16 (M3 screws would probably work but it was not tested, or you can glue parts together)
Print settings
Both towers were printed out of PETG.
Magnetic was printed on Prusa MINI+
Layer height : 0.25 mm
Nozzle : 0.4 mm
No Support
Infill : 15%
Customizable was printed on Voron 2.4 350mm (biggest dimension is height 229mm)
Layer height : 0.3 mm
Nozzle : 0.4 mm
No Support
Infill : 13%