Combustion Inc. Dual Temperature Probe, Boosters, and Display Case for Prusa XL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed from the original to print on my Prusa XL with added retention blocking
- Rating
- 4 / 5
- Likes
- 6
- Downloads
- 42
- Makes
- 1
- Views
- 366
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My print settings are:
- Hatchbox PLA and Hatchbox Metallic PLA using my custom temperature settings (because it looks like the presets are wrong)
- 0.20mm speed profile
- added a brim due to the large surfaces wanting to curl up at the corners
- adding snug supports set to 0.1 detachable
- 15% honeycomb infill
- Nearest seam (to hide it)
- Classic perimeter (because it seemed to fill in the fire icon and combustion text better)
I have two versions, one with the retention blocks separate and one with them integrated into the lid model. I sized retention blocks them so I could attach them to the upper lid interior with 3M exterior double sided tape, which holds quite firmly. To attach them I attached the tape to the blocks, then set them in their locations on top of the display and probes with the tape exposed facing upwards. I closed the lid which pressed them just close enough to attach to the lid, then carefully opened the lid and held both blocks firmly to the lid for 30 seconds.
The integrated version has the blocks 1mm taller to account for the 3M exterior tape that isn't there.