1 / 5
Salamander Hueforge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Salamander Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Jade White
At layer #13 (1.12mm) swap to Yellow for the rest.