1 / 5
SCART-Lock for RetroTINK-4K
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stop your SCART cables from pulling out of your RetroTINK-4K.
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 331
- Makes
- 0
- Views
- 1,823
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
The SCART-Lock for RetroTINK-4K slips over the top of a standard SCART connector. The thumb screw flanges securely anchor the SCART cable to your TINK so you can enjoy worry-free crispy RGB video.
Purchase here: kytor.com/store/product/rt4k-scart-lock
SCART-Lock is intended only for use with standard SCART connectors as shown in the photos and should be considered incompatible with alternate SCART connectors.
Printing:
- Use Duramic 3D PLA or equivalent
- 0.4mm nozzle, 0.2mm height, 50%+ infill, 4+ walls
- For the artwork style, use the Bambu/Orca paint tool to fill color
- No brim or supports necessary
Assembly:
- Use a soldering iron or alternate to insert these Heat Nuts from the flange face side
- Use this technique to ensure the nuts are perfectly flush
- Thread in these Thumbscrews
- Slip SCART-Lock over the SCART connector and secure to the RT4K
Note: Amazon links are affiliates.