◤ LAB GRAB | microscope slides
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.51 – €0.62 net (excluding VAT)
For file: LAB_GRAB_microscope_slide_VINC3D_0.4n_0.2mm_PLA_MK4IS_25m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.56 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 25.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Ergonomic tool for preparing and transporting microscope slides individually. The small dot marks the center of gravity.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 61
- Makes
- 0
- Views
- 398
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🔬 Originally, I developed this tool to simplify the handling of medical samples in the clinical environment. 🧠🧬💉
The sides are curved for a better feel and the small dot helps to keep the slide optimally centered. It works for all standard slides measuring 76 x 26 mm (DIN ISO 8037-1).
Very good printing with the PLA standard settings of the PRUSA Slicer.