Rifle Scope Dust Cap Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.65 – €0.79 net (excluding VAT)
For file: scope_cap_0.4n_0.25mm_PLA_MINI_43m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.72 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 43.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement dust cap for a two part elastic connected scope protector.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
One of the dust caps for my scope cracked and lost an ear. This is a replacement for the exact size and shape of our model. It is approx 40mm diameter and 28.5mm tall.
It's designed to accept the original clear plastic lens (37mm x 1.5mm) printed into the part. The G-code has a pause built in at the place where the lens can be inserted and then the retaining ring is printed on top of it.
I also included a closed end version in case you don't have a clear plastic lens to include in the print.