1 / 1
Sovol SV06 Spool Side Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Its a Side Spool holder Mount for the Sovol SV06
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 52
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix that doesnt require t-slot nuts, should be printed like I uploaded it for better strength.
----------------------
Original Description
What is it and why you may need it.
It is a Side Spoolholder for the Sovol SV06. I created it because I didn't have room above the printer to mount the Spoolholder. It is at a slight angle so the Filament would feed smoothly in the Extruder without any hiccup.
Print Settings:
- Orientation: I recommend printing it in the orientation that I uploaded it.
- Infill: 25% and above
- Support: No Support needed because the screw holes for mounting it to the printer have a sacrificial layer which just need to be either drilled out or with a screw and a bit of force pushed through.
How to Assemble:
Just Screw the Filament Holder in to the 3D Print with the to Original M5*10mm Screws. Like seen in the Picture below.
Then you Add in The other Two holes 2 M3*12mm screws and 2 T-Slot Nuts. Then Just Screw it to the aluminum extrusion.