1 / 4
Talentcell YB1206000-USB Battery Power Board Mounting Bracket — image 1
1 / 4

Talentcell YB1206000-USB Battery Power Board Mounting Bracket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This bracket is designed to hold the power board of a Talentcell 6000mAh…

Rating
0 / 5
Likes
1
Downloads
13
Makes
0
Views
139
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

This bracket is designed to hold the power board of a Talentcell 6000mAh (https://www.amazon.com/gp/product/B00ME3ZH7C?ie=UTF8&psc=1&linkCode=sl1&tag=thpefi0f-20&linkId=04dc49866cc452a9f995268753a81344&language=en_US&ref_=as_li_ss_tl) on edge so you can decase the battery and mount the board in a project in such a way as to make the LED's visible.

Designed originally to accommodate installing the battery inside Quentin Machiels' Proton Pack (https://www.thingiverse.com/thing:4621554), which is easier to do if you take the case off the battery itself. This would work for anything you need, though.

The board mounts with the LED's down towards the slot. By cutting a matching slot in your project, you can keep the power level of the battery visible. If the board is a tad too loose for your liking, a small dab of hot glue will keep it right in place.

Print with supports for the gap between the overlap of the vertical arms, and cut it open with a box knife. Also, don't use a filament that's excessively hard or brittle to prevent breaking the vertical arms.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

200

Infill:

50

Filament: Generic PLA

Category: Electronics

Tags